Paradox R915

The Paradox R915 are reliable and cost effective readers, that use only 4 wires instead of the usual 7 to connect to the 4-wire ACM12 single door access control modules. Designed for both the Paradox EVO192 and EVOHD control panels, the R915 also includes a tri-colour LED display (red, green and amber) that is used to indicate the reader's status.

These Paradox Readers come in two colour's Black and White.

Features

• Weather-resistant design (injected rubber gasket and PCB cover)
• Only 4 wires (instead of 7) to connect with 4-wire access control modules
• Tricolor LED display
• Adjustable red / green LED intensity and buzzer frequency
• Available in 2 colors: black or white
• Compatible with EVO192 and EVOHD

Keypad
This reader can use both the Card and PIN functions. However, the PIN must be entered after the card is scanned if Card and PIN is enabled. You can also use the Card Only, PIN Only or Card or PIN settings, which are set in the ACM12. PIN settings are only available with ACM12 V4.0 or higher. The key is used to cancel a PIN entry, the key is used when using Flexible Code Length and entering a code shorter than 6 digits.

Arming and Disarming
It is currently possible to arm and disarm the system if the proper options are enabled in the User and door’s settings. Refer to your EVO programming guide for additional information.

Tricolour LED Display
The reader includes a tricolour LED display (red, green and amber) that is used to indicate system status as shown in the LED display table.

Audible Tone
The reader includes a built in beeper.

Weather Resistant
The rubber gasket and plastic PCB cover allows you to mount your R915 indoors or outdoors.